Rough and Uneven Walls
Irregular plaster and porous surfaces can produce an inconsistent finish and increase paint consumption.
Wall & Surface Solutions
Smooth, repair and prepare every surface
TechTevo solutions help repair damaged areas, level uneven substrates and create a strong, smooth base for painting and finishing. From rough plaster and damaged walls to cracks, dents and worn wood, our systems support dependable preparation and long-lasting results.
Smooth, uniform finish
Strong surface adhesion
Interior and exterior solutions
Easy application and finishing
Surface Challenges
Better finishes begin with better preparation
Paint and decorative coatings cannot perform properly on weak, uneven or contaminated surfaces. Repairing defects and preparing the substrate correctly helps improve adhesion, appearance and service life.
Cracks and Surface Defects
Cracks, holes and damaged areas can remain visible through the final coating and may continue to deteriorate if left untreated.
Dampness and Flaking Paint
Moisture exposure and poor surface preparation can contribute to peeling, flaking and frequent repainting.
Damaged Wood
Rot, scratches, dents and chipped edges can affect the strength and appearance of doors, frames, furniture and cabinetry.
Correct diagnosis and surface preparation help create a smoother finish, stronger adhesion and more reliable coating performance.
Explore repair solutionsTechTevo Repair Systems
Purpose-built solutions for walls and wood
TechTevo provides dedicated materials for smoothing masonry surfaces and restoring damaged wooden components before painting or decorative finishing.
01
Wall Preparation
TEVO 2064 Wall Putty
Smooth, strong preparation for walls and ceilings
TEVO 2064 is a high-whiteness wall putty designed to produce a smooth and uniform finish over rough plaster. Its strong bonding, water resistance and excellent workability create a reliable base for emulsion paints on interior and exterior surfaces.
Key properties
- High whiteness
- Smooth and uniform finish
- Strong adhesion to base plaster
- Good water resistance
- Excellent workability
- Good abrasion resistance
- Controlled water-vapour permeability
- Good intercoat adhesion with emulsion paints
- Helps resist algae and fungal growth
- No water curing required
Typical spreading rate:
Approximately 7–10 sq. ft. per kg, depending on surface profile, porosity and application thickness.
Important note:
Request TEVO 2064 Information
TEVO 2064 is intended for surface smoothing and preparation. It should not be used as a structural crack-filling material.
02
Wood Repair
TEVO 2060 Wood Filler
Repair damaged wood with a smooth, workable finish
TEVO 2060 is a water-based, acrylic wood filler developed for filling scratches, dents, cracks and damaged areas in wooden surfaces. It provides strong anchoring, low shrinkage and a durable finish that can be sanded, stained or painted.
Key properties
- Water-based acrylic formulation
- Non-flammable
- Low odour
- Low shrinkage
- Strong surface anchoring
- High durability
- Sandable after drying
- Stainable and paintable
- Easy water cleanup
- Suitable for interior wood repairs
Typical applications
- Window frames
- Furniture
- Mouldings
- Panelling
- Cabinetry
- Cracked or chipped wood
- Rotted and damaged wooden areas
Performance & Versatility
Better preparation for stronger, smoother finishes
From levelling rough walls to restoring damaged wood, TechTevo surface preparation solutions improve application quality and provide a dependable base for painting and decorative finishing.
Smooth Finish
Helps correct surface irregularities and creates a smooth, uniform base for subsequent coatings.
Strong Adhesion
Promotes reliable bonding to prepared plaster, masonry and wooden substrates.
Improved Durability
Supports a more stable and durable surface before paint or decorative finishes are applied.
Easy Application
Workable formulations allow controlled application, finishing and sanding where required.
Application Areas
Solutions for walls, ceilings and wooden surfaces
TechTevo repair and preparation materials can be used across residential, commercial and maintenance projects where a clean, level and dependable substrate is required.
View Application ProcessInterior Walls
Smoothing plastered walls before emulsion paint and decorative finishing.
Exterior Walls
Preparing suitable exterior masonry and plaster surfaces for protective coatings.
Ceilings
Levelling rough or uneven ceiling surfaces to achieve a more uniform appearance.
Renovation Work
Repairing minor defects and worn areas during refurbishment and repainting projects.
Furniture & Cabinetry
Filling scratches, dents and minor damage in wooden furniture and cabinets.
Wooden Components
Repairing mouldings, panelling, window frames and other interior wooden components.
Simple Application Process
Prepare, repair and finish the surface
Correct surface preparation helps TEVO 2064 Wall Putty and TEVO 2060 Wood Filler bond properly and deliver a smooth, durable finish. Follow these basic steps before painting or applying a decorative coating.
Inspect the Surface
Check the wall, ceiling or wooden surface for dust, loose material, cracks, dents, moisture and damaged areas.
Clean the Substrate
Remove dust, dirt, grease, loose paint and weak material. The substrate must be clean, stable and suitable for repair.
Repair Major Defects
Repair active leaks, structural cracks and seriously damaged areas with the appropriate repair system before applying putty or filler.
Apply the Product
Apply TEVO 2064 to suitable wall surfaces or TEVO 2060 to damaged wood using the appropriate application tool and recommended thickness.
Allow It to Dry
Let the applied material dry properly. Drying time may vary according to thickness, surface condition, temperature and ventilation.
Sand and Finish
Sand the dry surface where required, remove sanding dust and apply the selected paint, stain or decorative finishing system.
Technical Support
Need help choosing the right surface repair solution?
Talk to TechTevo about your wall preparation, surface repair or wood restoration requirements. Our team can help you select the right product and application approach for your project.